5000W/ 48V water heater dump load element [RE-wrenches]
Jay Peltz, Peltz Power
jay at asis.com
Sat Dec 23 11:52:08 PST 2006
<x-flowed>
HI Hugh,
Do you like the Tristar external relay package?
thanks and happy holiday
jay
peltz power
On Dec 23, 2006, at 8:35 AM, Hugh Piggott wrote:
>
> I normally recommend using a water heater on the tristar
> controllers I install. It's well worth the hassle if there is a
> significant amount of power being dumped. I use a relay (battery
> or inverter powered) via the thermostat to transfer the current to
> a space heater when the water is hot. Obviously the relay needs to
> be able to handle the current, which tends to be high. Also you
> will need a suitable wire run from the battery shed to the hot
> water tank. A bit of power loss in this wire run is no big deal.
> --
> Hugh
>
> Scoraig Wind Electric
> http://www.scoraigwind.co.uk/
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list