Outback GFX with Generators [RE-wrenches]

[Todd Cory, Mt. Shasta Energy Services]

<x-flowed>

The best solution is the brilliant one presented by Darryl, using a 2:1 
step down transformer to take a genny's 120 volt output don to around 60 
volts, rectify it and run it as an input to a MX60. The other possible 
solution is an inverter generator.

Todd

Nicholas Ponzio wrote:

>Chris,
>
>Can we get an update on the status of using generator input with the
>grid-tie inverters? As I'm sure you know, this is a major issue with some
>clients. 
>
>Thanks in advance.
>
>  
>


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------



</x-flowed>