metallic raceway & MC cable [RE-wrenches]

[Jeff Yago]

Whe had this discussion with a local inspector who agreed that it must be EMT, IMT, or rigid.   However, since the entrance for us was going to be through a low sloping roof, we felt it was better to go with the threaded rigid since the run was very short to the first dis-connect and we felt thinwall EMT would not last long if we just tried to seal around it at a roof penetration without other protection. On high voltage DC arrays I sleep better at night knowing some homeowner would have a much harder time driving a nail throught a metal conduit when trying to hang a picture!

Jeff Yago
Dunimis Technology Inc.
www.pvforyou.com


_____________________________________________________________
Netscape.  Just the Net You Need.


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------