small air compressors [RE-wrenches]
Jeff Wongstrom
thirstylake at interbel.net
Wed Oct 18 13:12:29 PDT 2006
<x-flowed>
Jay,
Here is some more info:
Device HP Rated Inrush Running
tablesaw 1 3/4 15a 55a 5 (no load)
dust collect. 1 12 34 3.7
air comp. 2 10 23 8.6
The tablesaw does not like to start when the shop is cold. The
compressor is oil less.
>>
>>
>> Hello Jay,
>>
>> From a 3524 I use a 2hp Porter Cable pancake air compressor (2.6
>> scfm @ 90 psi) that came with a finish nailer. This compressor
>> should power a framing nailer but only with intermittant nailing.
>> Works great for filling tires(easy to carry around). Painting I
>> have not tried.
>>
>> Jeff Wongstrom
>> NABCEP Certified Solar Installer
>> Thirsty Lake Solar
>> 406-889-5324
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list