*** SPAM *** RE: Outback FX voltage fun [RE-wrenches]

[Christopher Freitas --- OutBack Power]

A large MOV would prevent damage to the AC loads perhaps - but it would 
eventually fail itself after enough time.  The real solution is to 
address the root of the problem with a solution which dampens the 
"spikes" - either capacitance or load (resistance).  

Christopher


Darryl Thayer wrote:
> Perhaps an industrial (400 volt MOV or the other type) arrestor could 
> tame the surge voltage.

Christopher Freitas
OutBack Power Systems, Inc.
cfreitas @ outbackpower.com  
www.outbackpower.com
Arlington WA USA
Tel 360 435 6030  


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------