Cistern gauge [RE-wrenches]

[Jeff Wongstrom]

Thanks Windy,

I talked with Integral Controls.  One approach for metering the cistern
level is to have two or three float switches at different levels in the
cistern that turn on LEDs (i.e. green light = 2/3 full, red light 1/3 full)
operated off the house battery.  These float switches have pipe fittings
that screw into a length of pipe inserted vertically in the cistern.

Another approach would be to use the electronic pump station which among
other pump control options gives accurate fluid level readings.


Jeff Wongstrom
NABCEP Certified Solar Installer
Thirsty Lake Solar
406-889-5324 


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------