Frigidaire front loaders [RE-wrenches]

[Christopher Freitas --- OutBack Power]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Shopping for a new car? 
Pay 2-3% below invoice on a new car of your choice. 
Save thousands with our free car discount finder service!
http://click.topica.com/caaexd6bz8Qcsbz9JC9a/Dealix
-------------------------------------------------------------------

Ray Walters wrote:
> I have a customer that can't run their Frigidaire Front loader 
> on a SW4048. 

> They have to start the generator (older Liquid cooled Generac) to 
> run it. I was just going to ask the list about fixing that for them. > 
> What about Outbacks?

We haven't seen any real problems with running front loaders or other 
similar appliances - except for a slight issue on one customer's stabler 
washer when the washer is the only load - if he turns on a single CF 
light first it then works fine... and no - he is not using search 
mode... I still can't figure that one out.

The problem with the SW series waveform usually is that it sits at the 
zero crossing for a while (just like with the mod-square waveform).  The 
waveform of a real sinewave (like the OutBack) goes quickly from 
negative to positive - which is what the controls in the appliance are 
expecting.  

Christopher Freitas
OutBack Power Systems, Inc.
cfreitas @ outbackpower.com  
www.outbackpower.com
Arlington WA USA
Tel 360 435 6030  

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Packet8 Digital Phones Service can save you up to
$999 annually on your phone bill! First Month Free!
Free Activation! Save $110 instantly. Wow. 1-877-868-1135
http://click.topica.com/caaexdPbz8Qcsbz9JC9f/ TMONE
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------