Outback parrallel with inverter generator [RE-wrenches]

William Miller wrmiller at charter.net
Tue Mar 7 19:26:32 PST 2006


<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
http://click.topica.com/caaexd8bz8Qcsbz9JC9a/PC Powerscan
-------------------------------------------------------------------




Darryl:

The connection is not a parallel connection, rather the generator runs into 
the input and the inverter will assist the generator if the output 
requirements exceed the input settings.  I tried to find that passage in 
the manual that states this but could not in the short time I had available 
this evening.   This is how the  SW inverter works and I'm positive the 
Outback works the same.

William







At 02:45 PM 3/7/2006, you wrote:
>Has anyone tried using a suburu inverter generator in
>parrallel with an Outback VFX inverter to power heaver
>loads and recharge batteries through the inverter?
>What are the connections required and settings.
>
>Thanks Darryl
>
>__________________________________________________
>Do You Yahoo!?
>Tired of spam?  Yahoo! Mail has the best spam protection around
>http://mail.yahoo.com

--
[Non-text portions of this message have been removed]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get your VoIP on with Packet8's Videophone.
Crystal clear images of your loved ones. Free Month.
30 day money back guarantee. 1-877-868-1135
http://click.topica.com/caaexdTbz8Qcsbz9JC9f/ TMONE
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------




</x-flowed>



More information about the RE-wrenches mailing list