Inverters for Wind Turbines [RE-wrenches]
Ray Walters
walters at taosnet.com
Wed Jan 18 20:15:04 PST 2006
<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Jumpstart your love life at AmericanSinglesR.com.
Meet someone in your area today. Millions of member profiles.
Create a profile, post photos and search for free.
http://click.topica.com/caaemrrbz8Qcsbz9JC9a/Spark Network
-------------------------------------------------------------------
Kurt Albershardt wrote:
>
> Just prior to the XL.1 release, after looking at the rather primitive
> controller Bergey was selling, I contacted Bergey about alternate
> controllers for the XL.1. I managed to hook a Bergey designer up with
> Dan Pringle at SCI in an attempt to get the XL.1 working with an MPPT
> controller. Didn't quite pan out, but I seem to recall some options
> Bergey had considered for different (higher) alternator voltages. If
> we knew the possible input range options for a WindyBoy, Bergey might
> possibly be willing to cooperate.
Hi Kurt;
I've been trying to prod (gently) the Bergey guys for years to come out
with a 48 volt version of the XL.1. I guess they have issues on the
alternator side that I can't quite appreciate. Sure would solve some of
the high current (and possibly) grid tie issues we're seeing with this
monster windmill (I've regularly seen 1700 watts measured from a 1000
watt rated unit)
Ray
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Shopping for a new car?
Pay 2-3% below invoice on a new car of your choice.
Save thousands with our free car discount finder service!
http://click.topica.com/caaemrqbz8Qcsbz9JC9f/Dealix
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list