Inverters for Wind Turbines [RE-wrenches]

[Kurt Albershardt]

<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Jumpstart your love life at AmericanSinglesR.com.  
Meet someone in your area today. Millions of member profiles. 
Create a profile, post photos and search for free.
http://click.topica.com/caaemrrbz8Qcsbz9JC9a/Spark Network
-------------------------------------------------------------------

--On Wednesday, January 18, 2006 8:43 PM -0700 Ray Walters <walters at taosnet.com> wrote:
>
> Any chance of an inverter being developed to work with the Bergey XL.1? I've got one installed a couple of years ago, now they've gone on grid. I guess the input voltage is too low for SMA's inverters?


Just prior to the XL.1 release, after looking at the rather primitive controller Bergey was selling, I contacted Bergey about alternate controllers for the XL.1.  I managed to hook a Bergey designer up with Dan Pringle at SCI in an attempt to get the XL.1 working with an MPPT controller.  Didn't quite pan out, but I seem to recall some options Bergey had considered for different (higher) alternator voltages.  If we knew the possible input range options for a WindyBoy, Bergey might possibly be 
willing to cooperate.





.

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Shopping for a new car? 
Pay 2-3% below invoice on a new car of your choice. 
Save thousands with our free car discount finder service!
http://click.topica.com/caaemrqbz8Qcsbz9JC9f/Dealix
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------


</x-flowed>