Battery strings [RE-wrenches]
Chris Worcester
chris at solarwindworks.com
Fri Sep 15 07:13:12 PDT 2006
Hi Bob,
If you want to use a bus bar assembly I hooked up 10 VFX3648's to 2 strings
of Rolls 2-KS-33's using Ilsco insulated 4/0 x 14 port splice taps/bars.
This is a really neat way to do a 4/0 bus bar. They make these
splicer/reducers from two hole to 14 hole. They were around $270 for the
pair and well worth it.
Sincerely,
Chris Worcester
NABCEP Certified PV Installer
USA Distributor of Proven Wind Turbines
Toll Free: 877-682-4503
Fax: 530-582-4603
www.solarwindworks.com
chris at solarwindworks.com
"Proven Energy Solutions"
-----Original Message-----
From: Bob Ellison [mailto:ellison at gisco.net]
Sent: Friday, September 15, 2006 2:09 AM
To: RE-wrenches at topica.com
Subject: Battery strings [RE-wrenches]
I am putting together a pack of 12 L-16's @ 24 volts and am wondering if
there is a definite opinion on what works better, connecting at the corners
of the pack or running each string to it's own buss bar and from there to
the inverter.
I have seen failures of the major positive and negative when corner
connected. I assume from the all the banks current running through the
connections. I have also heard suggestions to rearrange the battery bank
during it's life. (too much like work)
Has anyone had better luck with each string going to a bus bar then to the
inverter? Similar to the "big buss" that Outback used to make?
Thanks,
Bob
[Non-text portions of this message have been removed]
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address:
www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list