SunFrost Voltage Upgrade question [RE-wrenches]

Christopher Freitas --- OutBack Power cfreitas at outbackpower.com
Thu Jul 20 13:00:21 PDT 2006


Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get up to 4 No-risk mortgage quotes – No SSN needed
Competitive rates from the nation’s top lenders in minutes
Lower your mortgage payments by up to $303/month!
http://click.topica.com/caaeYi1bz8Qcsbz9JC9a/ BestLenderFinder
-------------------------------------------------------------------

That is a great link Kurt - lots of info on the Danfoss compressors - 
but there is one scary note at the very bottom:

------------------------------------------------------

Danfoss Power Modules For Older (4-Pin) Compressors.

Feb. 19, 2003 - Danfoss has discontinued production of all 4-pin 
modules.  Owners of older 4-pin compressors will need to replace both 
the module and compressor with either the BD35F or BD50 above.

------------------------------------------------------

Not sure if Sunfrost used this module or not - I suspect that it is 
possible because of the number of years they have built fridges...

> Does it use one of the Danfoss hermetic compressors with the external 
> power module?  If so, upi're in luck -- just swap the old 12V power 
> module for a 24V one or the new dual voltage 
> version<http://www.rparts.com/Catalog/Major_Components/compressors/Danfoss/danfoss.asp>
> 

Christopher Freitas
OutBack Power Systems, Inc.
cfreitas @ outbackpower.com  
www.outbackpower.com
Arlington WA USA
Tel 360 435 6030  


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------





More information about the RE-wrenches mailing list