tower vibration [RE-wrenches]

[Roy Butler, Four Winds RE]

<x-flowed>

Kirk,

I've been running the same machine for 6 years now. The only 2 
maintenance items I've ever done to it is balance the blades and repair 
the tower mount insert.
Ian is right....it's likely originating from the machine...out of 
balance blades is my guess.

I see that Bob has offered you the blade balancing procedure. It's quite 
easy.....off the tower that is!
FYI....check the tower insert for egging of the mounting holes. You 
probably already did this...but it's worth a hard look. The vibration 
almost always loosens the tower mount......and every couple of years I 
have to cut the top 6" off the 2.5" pipe and drill new holes.....

Roy Butler
NABCEP Certified Solar PV Installer®
NYSERDA eligible PV & wind installer 
Four Winds Renewable Energy, LLC
8902 Route 46
Arkport, NY 14807
607-324-9747
www.four-winds-energy.com



Kirk Herander wrote:

>Hello,
> 
>I have an old World Power H1500 (1500 watt) machine on an 80’ homebrew
>sectional steel pipe tower. It’s in a high wind area, and has flown with
>no complaints for 7 + years. Several months ago, the tower started to
>vibrate in high winds, maybe 15 + MPH, when the machine really starts
>cooking. I lowered the tower expecting to find something obvious – but
>no luck. The blades are on tight, the tail boom pivot bolt/bearings look
>fine, all bolts are tight, no problems with the machine that I can see.
>When the tower is up and brake on, there is the normal several inches of
>deflection on all guys. But at those higher wind speeds the front and
>rear middle and top guys develop at least a foot of “up and down”
>deflection – it really looks scary – and the tower shakes big time. What
>am I missing? 
>Could the guys be too tight? Or too loose? Thanks.
> 
>Kirk Herander
>Vermont Solar Engineering
>802.863.1202
>fax 802.863-7908
>NABCEP(tm) Certified Solar PV Installer
>Xantrex Certified Dealer Charter Member
>NYSERDA-eligible installer
>VT Solar and Wind Partner
> 
>
>  _____  
>
>I am using the free version of SPAMfighter for private users.
>It has removed 13278 spam emails to date.
>Paying users do not have this message in their emails.
>Try SPAMfighter <http://www.spamfighter.com/Product_Info.asp?>  for free
>now!
>
>
>[Non-text portions of this message have been removed]
>
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
>
>List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
>
>Check out participant bios: www.mrsharkey.com/wrenches/
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>
>
>
>
>
>  
>


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------

</x-flowed>