Frigidaire front loaders [RE-wrenches]

[Geoff Greenfield]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Shopping for a new car? 
Pay 2-3% below invoice on a new car of your choice. 
Save thousands with our free car discount finder service!
http://click.topica.com/caaexd6bz8Qcsbz9JC9a/Dealix
-------------------------------------------------------------------

It is a bit off the beaten track, but I personally like and promote the
Staber "top loading" horizontal axis washer. This is the only unit I know of
specifically allowing mod-sine inverter use with full warranty etc (When
ordering they ask if it is grid or which inverter).  I ran mine on a DR1524
for years until I was done with 1000's of cloth diapers and got a gas dryer.
The 1/3 hp motor and glow bar combined with base loads and washer caused a
few too many nuisance trips and that was all it took for us to upgrade to
the outback.

Check it out carefully and be honest with your customers - It is not for
everyone, but neither is off grid living.  The spin cycle sounds like a jet
engine (but reduces drying time).   It is set up for factory supported
service/maint. rather than Mr. maytag coming to your door....  It is very
popular and I'm surprised it wasn't the first response to this post.  They
now have a "matching" dryer option, but I haven't looked too closely - I
shopped our dryer hard and chose one with moisture probes and a 1/3 HP
motor.

For a brighter energy future,

Geoff Greenfield
NABCEP Certified Energy Practitioner

THIRD SUN SOLAR & WIND POWER Ltd.
340 West State Street
Athens, OH 45701

www.third-sun.com
(740) 597-3111

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Sign Up for Packet8 and tell your phone company
to VoIP-Off. First Month Free! Then up to 50% off your
phone bill.  Free Equipment! Packet8 1-877-868-1135
http://click.topica.com/caaexdRbz8Qcsbz9JC9f/ TMONE
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------