bus bar clamps (was: calculation) [RE-wrenches]
Bob Ellison
ellison at gisco.net
Fri Jan 20 05:36:32 PST 2006
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Shopping for a new car?
Pay 2-3% below invoice on a new car of your choice.
Save thousands with our free car discount finder service!
http://click.topica.com/caaemrqbz8Qcsbz9JC9a/Dealix
-------------------------------------------------------------------
This is an area I don't normally get into, but wouldn't a clamp onto a
buss bar just contribute to the load on the buss bar like using a
breaker adds to the load?
Just getting confused, ( not hard on many day's
Bob
-----Original Message-----
From: Kurt Albershardt [mailto:info at es-ee.com]
Sent: Thursday, January 19, 2006 8:47 PM
To: RE-wrenches at topica.com
Subject: Re: bus bar clamps (was: calculation) [RE-wrenches]
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Jumpstart your love life at AmericanSinglesR.com.
Meet someone in your area today. Millions of member profiles.
Create a profile, post photos and search for free.
http://click.topica.com/caaemrrbz8QcsbfmDywa/Spark Network
-------------------------------------------------------------------
--On Thursday, January 19, 2006 5:30 PM -0800 "Todd Cory, Mt. Shasta
Energy Services" <toddcory at finestplanet.com> wrote:
> John Berdner wrote:
>
>> I have heard about some taps designed to clamp directly onto the bus
>> bars but have yet to find a part number or manufacturer. Any
>> suggestions out there ?
>
> Yes, this is a good thing to research. Does anyone know of a clamp
> device to tap a busbar?
T&B makes one for ground leads. I have seen others for current-carrying
conductors but it was a long time ago and I didn't ask who the
manufacturer was.
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Jumpstart your love life at AmericanSinglesR.com.
Meet someone in your area today. Millions of member profiles.
Create a profile, post photos and search for free.
http://click.topica.com/caaemrrbz8Qcsbz9JC9f/Spark Network
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list