calculation [RE-Wrenches] [RE-wrenches]
William Miller
wrmiller at charter.net
Thu Jan 19 09:13:37 PST 2006
<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Jumpstart your love life at AmericanSinglesR.com.
Meet someone in your area today. Millions of member profiles.
Create a profile, post photos and search for free.
http://click.topica.com/caaemrrbz8Qcsbz9JC9a/Spark Network
-------------------------------------------------------------------
At 06:20 AM 1/19/2006, you wrote:
Jeff:
I've never done this before and I'd like to know more about the
procedure. If in this scenario we have a meter/main combo, the leads "just
above the main lugs" are on the utility side of the meter. If we tap
there, we get no benefit from net metering (or at least no benefit when our
generation is greater than our draw). Futhermore, we have no right to tap
in this location. I am assuming therefore, that when you say "just above
the main lugs," you are referring to a location down stream of a separate
meter socket, correct?
In the case of a meter/main/combo, the only conductor between the meter and
the main are buss bars. Is it acceptable to drill and tap these buss bars
for lugs, or does this violate the devices listing?
Excuse my ignorance here and thanks in advance for clarifying.
William Miller
>Make the tap connections in the main service panel usually just above the
>main lugs using Polaris connectors, size IT-250 usually works fine.
>Jeff
--
[Non-text portions of this message have been removed]
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Shopping for a new car?
Pay 2-3% below invoice on a new car of your choice.
Save thousands with our free car discount finder service!
http://click.topica.com/caaemrqbz8Qcsbz9JC9f/Dealix
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list