Wiring SQE Pumps [RE-wrenches]
Ray Walters
walters at taosnet.com
Mon Jun 26 14:37:30 PDT 2006
<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
WIN A GAULEY OVERNIGHT RAFTING TRIP FOR TWO.
Enjoy two days of world-class whitewater with
a night of deluxe riverside camping in between.
http://click.topica.com/caaeUaEbz8Qcsbz9JC9a/ NAAR
-------------------------------------------------------------------
Here's another pump question: I've recently started trying the constant
pressure pumps from Franklin (the CP Mono-Drive and DO work on the
SW4024) and the SQE from Grundfos. People love the constant pressure, we
like the no surge, and higher efficiency. Here's the problem though, on
regular pumps, we wired 120 vac to the pressure switch, which then only
fire up the transformer and pump control when you needed water. On the
new constant pressure setups, they use a pressure transducer, or signal
switch, and we have to leave the transformer and controller on 24/7.
I thought about using a 2nd regular P-switch to feed power to the
system, but with a constant pressure system it would never reach the
high pressure cutoff. I thought about a voltage relay that shut off the
pump, when the controller quit sending power to the pump, but how do you
turn it on? We thought about controlling the relay with the signal from
the pressure transducer, but it might shut power on & off to the pump
every second....Day/ night timer.....
Who has the nifty way to wire this? Or just leave it all on, all the time?
Thanks as alway for all your great help,
Ray Walters
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Heres your chance to tell some of the most important names in
retailing and household products whats on your mind. You could win
a free iPod Nano by signing up for our new consumer opinion panel
and filling out a brief survey.
http://click.topica.com/caaeTvObz8Qcsbz9JC9f/ HomeWorldResearch
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list