SW sync problems [RE-wrenches]

[Drake]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
New Apple® iPod® nano. As Thin as a No. 2 Pencil. Stores up to 3 
Days of Songs! Get it Here FREE*!
http://click.topica.com/caaeatBbz8Qcsbz9JC9a/Superb Rewards 
-------------------------------------------------------------------

Thanks Mark,

The problem does look like a low voltage issue after all.  We opened up the
parameters and are crossing our fingers.

Drake


----- Original Message ----- 
From: "Mark Edmunds" <mark.edmunds at xantrex.com>
To: <RE-wrenches at topica.com>
Sent: Monday, November 14, 2005 3:29 PM
Subject: RE: SW sync problems [RE-wrenches]


Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
http://click.topica.com/caaeatrbz8Qcscjc22ia/PC PowerScan
-------------------------------------------------------------------

Hi Drake,

Some things to check on the inverters once you have verified that the
grid V and f is OK (within range 53 - 67 Hz):

1. Check connections at the inverters AC terminal block, both factory
side and field install side, make sure ALL screws are tight and wiring
is not loose.

2. Remove all 240Vac loads from the inverter's output and disconnect the
SWI cable between the two units.

Test each unit individually -  verify each inverter output voltage is
within 117-123Vac. Means good DC voltage, providing good sync signal,
and inverter circuit breaker is closed.


If none of these checks finds anything then a call to tech support would
be the next step.

Best Regards,

Mark



Mark Edmunds
Xantrex Technology Inc.

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Oprah vs Dr. Phil- who is your favorite? Vote now.
http://click.topica.com/caaeatsbz8Qcsbz9JC9f/Your opinion
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------