Sanyo 190's and MX 60's in cold temps [RE-wrenches]

[David Palumbo, Independent Power & Light]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need Emergency Cash? Get Up To $500 Now! 
No Credit Checks, Easy & Fast Approval 
Cash in you account Overnight!
http://click.topica.com/caadHk3bz8Qcsbz9JC9a/911PaydayAdvance
-------------------------------------------------------------------

Thanks Jeff. That was my gut feeling to begin with.
DP


<<Dave,

Sounds like it's too high. Believing the NEC and Code, you'd need to
multiply that 135Voc by 1.25 = more than 150 V. In reality, there is a
cell temperature factor, and even if it's half of what the NEC says,
you're still over 150V. And the Sanyo panels are rated at -0%, +5%, so
you're not getting any relief by sub-nameplate performance, and will
probably be over nameplate on voltage.

If it was me, I would not series string them. It's just begging for
problems down the road. Some of the Outback engineers tend to
underestimate our climate up here. It means more strings, more fuses,
but less trips back to the site later!

Jeff
Jeffery D. Wolfe, P.E.
Global Resource Options, Inc., Solar Energy Solutions
601 Old River Road, Suite 3, White River Junction, VT 05001-9030
800-374-4494 x107 Toll Free     802-295-4415 x107 Phone
802-295-4417 Fax
Jeff at GlobalResourceOptions.com             www.GlobalResourceOptions.com>>

-----Original Message-----
From: David Palumbo, Independent Power & Light [mailto:ipl at sover.net]
Sent: Sunday, July 10, 2005 3:11 PM
To: RE-wrenches at topica. com
Subject: Sanyo 190's and MX 60's in cold temps [RE-wrenches]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Take movies and games anywhere with a Free Playstation Portable!
http://click.topica.com/caadHlFbz8QcsbAltH2a/ProductTestPanel
-------------------------------------------------------------------

OutBack Power tells me to go ahead and series two Sanyo HIT 190's into
their MX60. They said to make sure it is a new model MX60 which is now
good for 150 VOC.

HIT 190 is 54.8V Max Power and 67.5 OCV, in series will be 109.6V Max
Power and 135 VOC

Site is in the North East Kingdom of Vermont, wicked cold (30 to 40
below occasionally), and will have reflection off of snow (top of pole
mount with array tilted at 85 degrees for winter). I have experienced
brightly sunny days where it has warmed all the way up to 10 below for
the highest daytime temp. Through in edge of cloud effect also.

My question is how much higher will the 135 VOC be pushed by the cold
temp.
and the snow reflectance?

Dave

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
http://click.topica.com/caadHlxbz8QcsbAltH2f/ProductTestPanel
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages:
http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Testers Wanted!
Take online surveys, earn Amazon vouchers.
http://click.topica.com/caadHvhbz8QcsbAlwJ5f/MediaTransfer
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get up to $1500.00 Fast and Easy!
No Credit Checks! No Paper Hassles! Nothing To Fax!
Apply Online and We'll Contact You Within the Hour!
http://click.topica.com/caadHk7bz8Qcsbz9JC9f/911PaydayAdvance
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------