SolLED question [RE-wrenches]

Kurt Nelson sunwise at cheqnet.net
Tue Jul 5 18:21:08 PDT 2005


Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Erase wrinkles without painful injections with Nexiderm SP.
Nexiderm SP is clinically proven to reduce wrinkles by 68% Click 
here to get your 30-day free supply.
http://click.topica.com/caadHlnbz8Qcsbz9JC9a/Nexiderm
-------------------------------------------------------------------

Yup, I've noticed that these bulbs often arrive with the cover knocked
crooked in shipping or the LED board kicked in to one side.  I have
always just straightened them out and placed them into service, some
outside as porch nite-lighting, but never in direct rain or if so,
facing down.  No problems so far.

Good luck -- Kurt

----------------------------------------------------------------

Kurt Nelson
PO Box 309
Cornucopia, WI 54827
715-742-3406
sunwise at cheqnet.net


-----Original Message-----
From: Allan Sindelar [mailto:allan at positiveenergysolar.com] 
Sent: Tuesday, July 05, 2005 2:31 PM

The Steca SolLED 12V led light was a well-made, long-lasting product
carried
by AEE (who discontinued carrying them). I recently ordered replacements
for
some that had been lifted from a sign-lighting installation we did a few
years ago. The new ones, from a different supplier, are labeled the
same,
but both the LED plate and a plastic cover are kind of popped into place
and
not secured. They work OK on the test bench, but I question their
longevity--and the plate with the leds doesn't stay in alignment with
the
base, and the plastic cover wants to fall off.

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
http://click.topica.com/caadHlxbz8Qcsbz9JC9f/ProductTestPanel
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------









More information about the RE-wrenches mailing list