el sid question [RE-wrenches]
bbassett at rockisland.com
bbassett at rockisland.com
Mon May 16 10:38:54 PDT 2005
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
http://click.topica.com/caadtaFbz8Qcsbz9JC9a/ProductTestPanel
-------------------------------------------------------------------
I've found a thermal valve that I think would work as an automatic
diversion valve, the main problem is that I think it's cast iron. Cost
is about $150. I haven't tried it yet. Let me know if you're interested,
I could get one to try.
Brad
AEE Solar
Kelly Keilwitz, Whidbey Sun & Wind wrote:
>
> Hi Todd & Jay,
> Most of our SHW systems are oversized for peak summer, or have smaller
> storage than ideal due to space limitations. We've been installing
> diversion
> loops that engage at a tank hi-temp setting. The collector fluid is
> diverted
> from the tank to soft copper in the crawlspace, PEX under (not in) a
> sunroom
> slab, etc. In another system we're considering using a relay to actuate
> a
> valve to dump domestic hot water to a rain barrel (emergency only).
> -Kelly
>
> Kelly Keilwitz, P.E.
> Whidbey Sun & Wind
> Renewable Energy Systems
> NABCEP Certified PV Installer
> 987 Wanamaker Rd, Coupeville, WA 98239
> Ph & Fax: 360.678.7131
> sunwind at whidbeysunwind.com
>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Erase wrinkles without painful injections with Nexiderm SP.
Nexiderm SP is clinically proven to reduce wrinkles by 68% Click
here to get your 30-day free supply.
http://click.topica.com/caadvf5bz8Qcsbz9JC9f/Nexiderm
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list