Water storage tank. [RE-wrenches]

Matt Tritt solarone at charter.net
Thu May 12 10:23:31 PDT 2005


<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
http://click.topica.com/caadtaFbz8Qcsbz9JC9a/ProductTestPanel
-------------------------------------------------------------------

David,

Virtually any size linear polyethylene tank is available, from 500 to 
10,000 gallons. An easy size to handle is a 2,500, but since you say 
it's for a nursery you'd better give 'em at least 5,000 in storage. This 
will get them through a couple days of no or low sun. Sizing for one 
day's use is a very bad idea. Be sure to get the heavier wall satiety.

Matt T

David Palumbo, Independent Power & Light wrote:

>Your free subscription is supported by today's sponsor:
>-------------------------------------------------------------------
>Get a Free T-Mobile Sidekick II plus $500 towards service! 
>Click here.
>http://click.topica.com/caaduFNbz8QcsbadqCja/ProductTestPanel
>-------------------------------------------------------------------
>
>
>Anyone have a recommendation on a type of tank for storing water for a
>gravity fed system. This is a watering system for a nursery. Looking for a
>large tank, but I have no idea how big a tank is available. 2,000 gallons?
>Larger?
>Their watering needs are modest at 1,200 to 1,600 gallons per "dry" day.
>
>It looks like that we will be using a Dankoff Slowpump (static water level
>is above grade, artesian , 10gpm) 4gpm pump with one 175W Shell module.
>Should yield 1,400 gpd (good solar day). I had hoped to sell them a Grundfos
>SQ Flex system, but the owner thinks the price was too high ($5K included
>350W pv with rack, labor not included). That depends on the price of the
>tank setup, as the SQ Flex I designed was going to utilize a pressure tank
>instead of the gravity fed system.
>
>The nursery owner is talking about not burying the tank, but enclosing it
>some kind of structure to keep the sun off of it.
>
>I am checking local farm suppliers on tanks. Any recommendations on what to
>look for and pricing ball parks?
>
>Dave
>
>Your free subscription is supported by today's sponsor:
>-------------------------------------------------------------------
>Get both the MiFi XM Satellite Radio and an Apple iPod for Free! 
>http://click.topica.com/caadtaJbz8QcsbadqCjf/ProductTestPanel 
>-------------------------------------------------------------------
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
>
>List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
>
>Check out participant bios: www.mrsharkey.com/wrenches/
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>
>
>
>
>  
>

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Save up to 75% on luxury bed & bath! Luxury sheets, duvets,
down comforters, plush towels & more woven from the finest
materials -- 400, 600, 1000 thread count & more from $29.99!
http://click.topica.com/caadt4Abz8Qcsbz9JC9f/SmartBargains
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: re-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------



</x-flowed>



More information about the RE-wrenches mailing list