OK-4 (MicroSine), or related models.... [RE-wrenches]

Tue May 10 18:08:04 PDT 2005

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Erase wrinkles without Botox!
Nexiderm SP is clinically proven to reduce wrinkles by 68%. Click 
here to start looking younger today!
http://click.topica.com/caadslIbz8Qcsbz9JC9a/Nexiderm
-------------------------------------------------------------------

These units that Dave / AEE has also do not meet the current UL
standard's anti-islanding requirements - but they were built and marked
before this requirement came into effect and so should be considered
"grandfathered" in by your local utility. New units from NKF should not
be marked with the UL standard as the version of the UL standard which
they had certified to is no longer in effect.  

NKF has a much nicer new design which replaced this model and is rated
at 500 watts - but they have not decided to bring this unit into the US
due to the marketplace size, cost of UL listing and the falling value of
the dollar.  

Christopher Freitas
OutBack Power Systems
cfreitas at outbackpower.com
19009 62nd Ave NE 
Arlington WA 98223 USA 
Tel 360 435 6030
Fax 360 435 6019
www.outbackpower.com 

>> -----Original Message-----
>> From: David Katz [mailto:david at aeesolar.com] 
>> Sent: Tuesday, May 10, 2005 3:06 PM
>> To: RE-wrenches at topica.com
>> Subject: Re: OK-4 (MicroSine), or related models.... [RE-wrenches]
>> 
>> 
>> Your free subscription is supported by today's sponsor:
>> -------------------------------------------------------------------
>> Get both the MiFi XM Satellite Radio and an Apple iPod for Free! 
>> http://click.topica.com/caadtaJbz8Qcsa9EeT0a/ProductTestPanel 
>> -------------------------------------------------------------------
>> 
>> Hi John,
>> I still have 30 of the microsine (NKF) OK4U  120V 60hz 
>> inverters.  They 
>> have a slight problem. This batch may have a diode that is under 
>> specifications require for the full 100 watts.  The diode 
>> will not give 
>> you a problem if the unit stays under 100 degrees C, or of it stays 
>> under 70 watts.  It can be programmed to not go over these 
>> levels before 
>> it is installed.  Call me if you have a question.
>> Thanks,
>> David
>> 
>> David Katz
>> President, AEE Solar
>> formerly Alternative Energy Engineering
>> 1155 Redway Drive - Box 339
>> Redway, CA 95560 USA
>> (707) 825-1200
>> (707) 825-1202
>> email: david at aeesolar.com
>> web: www.aeesolar.com
>> 
>> 
>> John Veix wrote:
>> 
>> >Your free subscription is supported by today's sponsor:
>> >-------------------------------------------------------------------
>> >Get both the MiFi XM Satellite Radio and an Apple iPod for Free!
>> >http://click.topica.com/caadtaJbz8QcsciHNopa/ProductTestPanel 
>> >-------------------------------------------------------------------
>> >
>> >
>> >Hi all,
>> >
>> >Remember the Microsine product - it was a bit of a under-powered 
>> >product at 100w, but had a certain specific market.
>> >
>> >What ever happened to them and are they still available 
>> somewhere. The 
>> >company that made them used to advertise but seems to be 
>> noted by its 
>> >absence.
>> >
>> >Thanks for any info.
>> >
>> >                                        cheers,             
>>            John Veix
>> >[Non-text portions of this message have been removed]
>> >
>> >Your free subscription is supported by today's sponsor:
>> >-------------------------------------------------------------------
>> >Need a Laptop? Get a Sony Vaio Laptop Free! 
>> >http://click.topica.com/caadtaFbz8QcsciHNopf/ProductTestPanel
>> >-------------------------------------------------------------------
>> >
>> >- - - -
>> >To send a message: RE-wrenches at topica.com
>> >
>> >Archive of previous messages: 
>> >http://lists.topica.com/lists/RE-wrenches/read
>> >
>> >List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
>> >
>> >Check out participant bios: www.mrsharkey.com/wrenches/
>> >
>> >Hosted by Home Power magazine
>> >
>> >Moderator: michael.welch at homepower.com
>> >
>> >
>> >
>> >
>> >
>> >  
>> >
>> 
>> Your free subscription is supported by today's sponsor:
>> -------------------------------------------------------------------
>> Sign up today for a No Annual Fee Discover® Platinum Card 
>> and get
 0% Intro APR on Purchases & Balance Transfers for 8 
>> Months, Up to 
>> 2% Cashback Bonus® reward on your purchases & 100% fraud 
>> protection. http://click.topica.com/caadtrVbz8Qcsa9EeT0f/DiscoverCard
>> -------------------------------------------------------------------
>> 
>> - - - -
>> To send a message: RE-wrenches at topica.com
>> 
>> Archive of previous messages: 
>> http://lists.topica.com/lists/RE->> wrenches/read
>> 
>> List rules & 
>> etiquette: 
>> www.mrsharkey.com/wrenches/etiquette.php
>> 
>> Check out participant bios: www.mrsharkey.com/wrenches/
>> 
>> Hosted by Home Power magazine
>> 
>> Moderator: michael.welch at homepower.com
>> 

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Save up to 75% on luxury bed & bath! Luxury sheets, duvets,
down comforters, plush towels & more woven from the finest
materials -- 400, 600, 1000 thread count & more from $29.99!
http://click.topica.com/caadt4Abz8Qcsbz9JC9f/SmartBargains
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------