Xantrex GT3 question [RE-wrenches]
Bob-O Schultze, Electron Connection
econnect at snowcrest.net
Thu Mar 24 07:22:11 PST 2005
<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Help us support US Troops Just Register Here.
http://click.topica.com/caadjGFbz8Qcsbz9JC9a/Permission Data
-------------------------------------------------------------------
Marco, and All,
I'm not sure that's going to fly in OR, but we'll
see. I just attended the Xantrex on-line training
course on the GT3.0. They had a number of photos
of existing installations, mostly in CA. Not ONE
of them would have passed in OR due to the fact
that there was no NEC required signing as to Voc,
Vnom, Inom, and Isc. Generally, that stuff would
go on the big Square D disco. In the absence of
one, it needs to go on the inverter itself down
by the incorporated disco. So much for the
"pleasing appearance and smooth lines" that X is
proud of. The more I see of approved CA
installations, the more scared I get.
Unfortunately, it's a more or less true statement
that as CA goes, so goes most of the country.
Unless you guys start policing yourselves AND
bring your inspectors up to speed on stuff like
that, we could be looking at another black eye
åla the '80s. Please do us ALL a favor and get
your s**t together.
Best, bob-O
>Marco, in northern CA they're going in without the less-than-lovely Square D
>HU361RB disconnect we've all learned to tolerate. Very clean and tidy. The
>disconnect on the bottom of the GT 3.0 allows AC and DC power to be shut
>off, and the inverter above it can be removed without leaving any hot
>connections or wires exposed. This finally seems to be an incorporated
>disconnect that makes everyone happy. But I imagine that Xantrex was just
>doing CYA in case your friendly local inspector decides that the HU361RB is
>the way it's always been done, and by god...
>Cheers,
>Doug Pratt
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Erase wrinkles without Botox! Nexiderm SP is clinically proven to
reduce wrinkles by 68% Start your free trial today and pay only
$5.95 for shipping & handling.
http://click.topica.com/caadfBTbz8Qcsbz9JC9f/Nexiderm
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list