Sunny Boy 6000U [RE-wrenches]

John Berdner jberdner at sma-america.com
Mon Jan 17 11:46:50 PST 2005


 ---------------------------------------  -

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
http://click.topica.com/caac2NQbz8Qcsbz9JC9a/PermissionData
-------------------------------------------------------------------

Marko:
 
We suggest 25% (or about 1750 Watts STC) as the smallest array size -
rule of thumb
As with any inverter, the efficiency below about 10% of rated power
start to fall off dramatically so I think smaller arrays would produce
more with one of our other products.
Which one to start with probably depends primarily on the customer's
schedule for expansion.
Short time to expansion >> 6k.
Undefined / long time to exapnsion >> smaller units.
 
Best Regards,
 
John Berdner

>>>>

>>> marco at pvthawaii.com 1/16/2005 06:50:42 PM >>>

Assuming a customer wanted to install a SB 6kW inverter with the idea
of
allowing for expansion in the future, what would be the recommended
smallest
array size (STC kW) for the initial array?

marco

Marco Mangelsdorf
President
ProVision Technologies, Inc.
69 Railroad Avenue, A-7
Hilo, Hawai'i 96720
(808) 969-3281, 934-7462 facsimile
www.provisiontechnologies.com 



--
[Non-text portions of this message have been removed]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Show your pride with a free* USA T-shirt.  Click here to confirm 
your address.
http://click.topica.com/caac2N5bz8Qcsbz9JC9f/PermissionData
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------






More information about the RE-wrenches mailing list