GC-1000 blowing string fuses [RE-wrenches]
Bill Brooks
bill at brooksolar.com
Tue Sep 6 15:02:27 PDT 2005
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need a new Cell Phone? A BlackBerry 7250 could be yours free! Find
out how!
http://click.topica.com/caadV2bbz8Qcsbz9JC9a/Amazing phone
-------------------------------------------------------------------
Jim,
My guess is the fuses are wearing out. It gets hot on that combiner board.
Also, make sure that the fuse holders are bent together (tight). Loose
holders will also contribute to high temperatures and early failures.
Bill.
-----Original Message-----
From: Jim Grundy [mailto:eenergy33 at aol.com]
Sent: Tuesday, September 06, 2005 2:21 PM
To: RE-wrenches at topica.com
Subject: GC-1000 blowing string fuses [RE-wrenches]
Hello Wrenches,
I have an AES GC-1000 that has been in the field operating with no
trouble for about four years. Recently, it started blowing the 10 amp
string fuses.
It is connected to 8 Solarex MSX-120 modules. The string current should
never near the 10 amp fuse rating. After replacing the blown fuse, and
testing
all PV and grid specs, the unit restarts and operates fine for a few more
weeks. I have not been able to see any correlation to temperature, high
insolation, etc.
Any thoughts or similar experiences to share would be appreciated.
Thanks,
Jim Grundy
NABCEP Certified Solar PV InstallerT
Elemental Energy
1750 Clark Rd
E. Montpelier, VT 05651
(802)-476-3441 P
(802)-476-5680 F
(802)-272-8933 C
EEnergy33 at aol.com
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
http://click.topica.com/caadVJEbz8Qcsbz9JC9f/PC PowerScan
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & how to change your email address: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list