L-16 charging voltages [RE-wrenches]
Kurt Nelson
sunwise at cheqnet.net
Sat May 21 09:26:08 PDT 2005
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get a Free Sirius Satellite Package, don't pass on this!
http://click.topica.com/caadwPhbz8Qcsbz9JC9a/ProductTestPanel
-------------------------------------------------------------------
While they should be checked more frequently, I only add water to my
batts perhaps four times a year. This even with the voltages held
higher than factory default settings on the charge controller and
occasional EQs approaching 16/32 volts. I think there is way too much
emphasis towards "maintenance free" batteries resulting in added expense
and a movement away from the tried and proven.
Kurt Nelson
----------------------------------------------------------------
Kurt Nelson
PO Box 309
Cornucopia, WI 54827
715-742-3406
sunwise at cheqnet.net
-----Original Message-----
From: Doug Pratt [mailto:dmpratt at sbcglobal.net]
Sent: Thursday, May 19, 2005 7:57 PM
To: RE-wrenches at topica.com
Subject: RE: L-16 charging voltages [RE-wrenches]
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get a Free T-Mobile Sidekick II plus $500 towards service!
Click here.
http://click.topica.com/caaduFNbz8QcsbAsGU2a/ProductTestPanel
-------------------------------------------------------------------
A better question is why did someone install wet-cell L-16s on an
emergency
back up system? They're going to suffer a short, ugly life no matter
what
you do! Wet-cell batteries need exercise to stay healthy...they aren't
going
to get it. They also need regular watering...experience leads me to
predict
they won't get that either. Wet-cells and backup systems are an unwise
combination. (Yeah, I've done it too, but that was years ago. Now I know
better!)
Cheers,
Doug Pratt
Dave,
What you say makes good sense to me... and I have found similar results
with
the
systems I do and maintain. I have also read contradictory advice on this
list
that L-16's being floated (for batter back up grid intertied systems)
need
to be
EQ'd once a month to "stir" the electrolyte, yet if they are being
floated
should there be a small electrolyte circulation happening anyway so why
the
EQ?
Todd
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Take movies and games anywhere with a Free Playstation Portable!
http://click.topica.com/caadwPbbz8QcsbAsGU2f/ProductTestPanel
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages:
http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Erase wrinkles without Botox! Nexiderm SP is clinically proven to
reduce wrinkles by 68% Click here to get your 30-day free supply.
http://click.topica.com/caadslIbz8Qcsbz9JC9f/Nexiderm
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list