[RE-wrenches]

Lee Tavenner solplex at montana.com
Thu Apr 21 15:33:59 PDT 2005


<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Personals at Meeting Friends Online.
Find your perfect partner...We’re here to help. 
Click below to register for FREE and start connecting!
http://click.topica.com/caadmZ5bz8Qcsbz9JC9a/MeetingFriendsOnline
-------------------------------------------------------------------

Hi Rick, Allan, Darryl, Kent, Geoff, and Wrenches.

Thanks for your suggestions on the two arrays project. Still looking 
for solution with fewer negatives.   The new array is 230 feet on the 
other side of the old array from the house, and the #4 copper from the 
house to the old array is buried, so I would prefer a 1-controller 
solution that doesn't require 2 more wires from the old array to the 
house.

How about wiring the 6 VLX 53s with 3 each in two series strings, and 
the two strings in parallel?  Then wire 2 of the 165s in series and 2 
more of the 165s in series, and parallel these two 2-165 strings.    
This results in a 36-volt nominal 6.2 amp old array and a 48-volt 
nominal 9.7 amp new array.  Then wire these two arrays in parallel.   
Net result--nominal 42 volt array with MPPT around 60.  In parallel the 
voltages go to the average and the amperages add.  Total power should 
be the sum of all 10 panels.  Would there be any mismatch losses?  If 
so, how would you calculate or  estimate these losses?  Any reasons I 
should not do this?  Thanks for you input.

  Lee Tavenner
Solar Plexus

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Sign up today for a No Annual Fee Discover® Platinum Card and get…
0% Intro APR on Purchases & Balance Transfers for 8 Months, Up to 
2% Cashback Bonus® reward on your purchases & 100% fraud 
protection.
http://click.topica.com/caadlRMbz8Qcsbz9JC9f/DiscoverCard
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------



</x-flowed>



More information about the RE-wrenches mailing list