Sharp modules [RE-wrenches]

Bill Brooks billb at endecon.com
Thu Mar 3 08:38:06 PST 2005


Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
http://click.topica.com/caadeMjbz8Qcsbz9JC9a/ProductTestPanel
-------------------------------------------------------------------

Jay,

It looks like the MX 60 has received its approval for up to 150 Vdc--that's
good news for your three module series string setup. What series overcurrent
protection are you using on that system. It still appears that the circuit
breakers are limited to 125 Vdc, so going with the Bussman tilt-out fuses is
the way to comply--is that what you are doing? I think your approach makes
the most sense and reduces the wiring by about half (less wires and smaller
wires).

Bill.


-----Original Message-----
From: Jay Peltz, Peltz Power [mailto:jay at asis.com] 
Sent: Thursday, March 03, 2005 7:17 AM
To: RE-wrenches at topica.com
Subject: Re: Sharp modules [RE-wrenches]

Hi Mo,

For off grid work I use either 6 or 9 panels top of pole rack.

That way I can do 3  x 24v panels in series with the MX 60 ( 48v battery
only though).

Less wires, circuit breakers and smaller wire.

jay

peltz power

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get a FREE* 5 Megapixel Digital Camera - yours to keep!
http://click.topica.com/caadeMobz8Qcsbz9JC9f/5 Megapixel Digital Camera Promotion
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------






More information about the RE-wrenches mailing list