Sharp modules [RE-wrenches]

Tue Mar 1 08:14:25 PST 2005

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
http://click.topica.com/caadeMjbz8Qcsbz9JC9a/ProductTestPanel
-------------------------------------------------------------------

Somehow this looks "cheesy" to me, having exposed wires run from a pole mount or
tracking rack to the PSPV combiner. I usually mount a bell box on the back of a
several panels to combine the MC cables and convert to USE2 inside carflex.

Todd

Jeff Wongstrom wrote:

> William,
>
> There is no need to wack off the end mc connectors. Order a premade use-2
> cable from your panel supplier with a male and female end long enough to
> reach to the j-box from both end panels.  Cut this cable at the appropriate
> spot, wire into j-box, and plug into panels.
>
> Jeff Wongstrom
> Thirsty Lake Solar
> 406-889-5324

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get both the MiFi XM Satellite Radio and an Apple iPod for Free! 
http://click.topica.com/caadeMlbz8Qcsbz9JC9f/ProductTestPanel 
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------