Mutiple Array Spacing at 38deg N Latitude [RE-wrenches]

[Jeremy Rodriguez]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Like music?  Get a CD player on us. Click here.
http://click.topica.com/caac2NUbz8Qcsbz9JC9a/PermissionData
-------------------------------------------------------------------

Dean,
Thanks a buch!
I actually came up with 38" spacing today.
I got that by taking the total height at the rear of the first array and
doubled it.
I guess that will work if you say use 36.4

Jeremy
----- Original Message -----
From: "Dean T. Newberry" <deant at dcn.org>
To: <RE-wrenches at topica.com>
Sent: Monday, January 10, 2005 11:41 AM
Subject: Re: Mutiple Array Spacing at 38deg N Latitude [RE-wrenches]




Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Like music?  Get a CD player on us. Click here.
http://click.topica.com/caac2NUbz8QcsbeJGBSa/PermissionData
-------------------------------------------------------------------

HI Jeremy,
I went to http://www.susdesign.com/sunangle/ to get the sun altitude
angle at 10:00 AM for your location  22.41degrees
This site has the trig functions.
http://www.univie.ac.at/future.media/moe/galerie/wfun/wfun.html

You want leg b and know  leg a and angle (a).
b = cot(a) * a,  cotangent is not a windows calculator function, so...
cot (a) = 1 / tan(a) therefore b = 1 / tan(a) *  leg a,
simplify b = leg a / tan (a)
in your case leg a = 15" the solution then is:
b = 15 / tan 22.4
b = 15 / .412
b = 36.4"

Your row spacing should be at least 36.4" to avoid inter-row shading in
December between 10AM and 2PM.

The rule of thumb derived for solar thermal collectors, is bascially
correct for the noon elevation angle, but that is not when you are
generating power. The tendancy of PV modules to dramatically reduce
output under only a little shading requires different assumptions.

cul  deant

Jeremy Rodriguez wrote:

>
>Wrenches,
>Can someone confirm spacing of one array to another to be object height x
2.
>I know it depends on your latitude. The site it at 38N
>I have studied some pages sent to me by DP&W but I still have a question.
>Is the object height the height from the roof?
>I have figured out that the highest point of the modules will be 15".  If I
use a factor of 2, it seems to be quite a distance to the next mount.
>Sorry, I normally do pole mounts and this will actually be my first grid
connected pv system to install here in Colorado.
>
>Thanks in advance,
>Jeremy
>All Solar
>CO, USA
>
>
>
>[Non-text portions of this message have been removed]
>
>Your free subscription is supported by today's sponsor:
>-------------------------------------------------------------------
>Get a free* Bible and salvation reading plan.  Click here.
>http://click.topica.com/caac2N9bz8QcsbdulIif/PermissionData
>-------------------------------------------------------------------
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages:
http://lists.topica.com/lists/RE-wrenches/read
>
>List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
>
>Check out participant bios: www.mrsharkey.com/wrenches/
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
>
>
>
>
>
>


--
Dean T. Newberry
Marketing and Sales

Quantum Energy Group
265 Applegate School Road, P.O. Box 158
Applegate, Ca. 95703

Email:  deant at dcn.org

Cell:   530 867-2392
Office:  530-878-4585
Fax:     530-878-6685

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
http://click.topica.com/caac2NQbz8QcsbeJGBSf/PermissionData
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Show your pride with a free* USA T-shirt.  Click here to confirm 
your address.
http://click.topica.com/caac2N5bz8Qcsbz9JC9f/PermissionData
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------