30 foot freestanding wind tower [RE-wrenches]

David Henry david at harmonyfarm.com
Thu May 19 17:48:55 PDT 2005


<x-flowed>
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need a new washer and dryer set? You could get one free!
http://click.topica.com/caadtaGbz8Qcsbz9JC9a/ProductTestPanel
-------------------------------------------------------------------


Wrenches,

We have a client that is located on a narrow ridge top that does not 
allow a guyed tower. It only needs to be 30'-40' tall. For wind 
generator service we are willing to tilt it or climb it. Tilting is 
preferred. We are considering the IDC 30 foot tilting pole tower. 
Anyone have experience with these? Any other suggestions? Wind gust 
speeds could probably exceed 100 mph since you can see for a LONG way 
from this location and we're about 10 miles from the pacific coast 
north of SF, CA. There is already PV on the project and it is 48 v on 
the DC side of the inverters. We're considering a Whisper 100 or 200 
(H40 or H80) primarily to augment winter charging.

Thanks in advance for your thoughtful comments,
David Henry
Harmony Farm Supply
(707) 823-9125 x14
(707) 823-1734 fax
david at harmonyfarm.com
www.harmonyfarm.com


--
[Non-text portions of this message have been removed]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Erase wrinkles without Botox! Nexiderm SP is clinically proven to 
reduce wrinkles by 68% Click here to get your 30-day free supply.
http://click.topica.com/caadslIbz8Qcsbz9JC9f/Nexiderm
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------



</x-flowed>



More information about the RE-wrenches mailing list