Drainback System integrated with forced air furnace [RE-wrenches]

Drake Chamberlin solar at ecoisp.com
Fri Dec 3 22:17:36 PST 2004


<x-flowed>
 

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Claim your fully stuffed Christmas Stocking now
http://click.topica.com/caacVmdbz8Qcsbz9JC9a/PermissionData
-------------------------------------------------------------------

I recently facilitated the repair of an old system that runs a hot water 
coil through a heating duct.  If the solar water tank is hot, the burners 
don't come on.

You don't need a 2 stage thermostat.  We used an aquastat and relay 
setup.  Contact me off the list for details.

-Drake


>Can anyone recommend a furnace that we can interface with a solar coil. I 
>would imagine we want the fan to continue to run but not the burner if we 
>are getting enough heat from the Solar Tank, correct? Two stage thermostat 
>needed?
>
>Thanks,
>Jeremy
>All Solar
>CO, USA

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get a Holy Bible for FREE!
http://click.topica.com/caacVl9bz8Qcsbz9JC9f/PermissionData
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------



</x-flowed>



More information about the RE-wrenches mailing list