pre-engineered ground racks [RE-wrenches]

Tom Lane, Energy Conservation Services tom at ecs-solar.com
Thu Sep 9 14:54:22 PDT 2004


 

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Sponsor a child today through Children International.  
Give a desperately poor child hope for a brighter future.
For only $18 a month you can make a difference!
http://click.topica.com/caacBBFbz8Qcsbz9JC9a/ChildrenInternational
-------------------------------------------------------------------

Oaten flashing will leak not if only when  gator tom
----- Original Message ----- 
From: "William Miller" <wrmiller at slonet.org>
To: <RE-wrenches at topica.com>
Sent: Thursday, September 09, 2004 1:30 PM
Subject: RE: pre-engineered ground racks [RE-wrenches]




Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Save up to 67% on Omaha Steaks + Get 6 FREE Burgers and a
FREE Cutlery Set + Cutting Board!
http://click.topica.com/caacBBEbz8QcsbAnkvFa/OmahaSteaks
-------------------------------------------------------------------

At 10:11 AM 9/9/2004, Graham Owen wrote:
>standoffs.  That said; lets compare the flashable standoffs; Pro Solar's
>"Fast-Jacks" will fit both an Oatey rubber boot flashing as well as
>standard all metal flashings.  The new Uni-Rac aluminum standoffs fits
>well under an Oatey flashing but will not allow a metal flashing to be

Graham:

I used the Fast Jacks on one installation and I was very concerned at the
structural integrity of a stand-off mounted with only one lag.  The jacks
were very wobbly.  This might be because we put more stress on the
stand-offs because we use Direct Power tilt-up racks (we don't use quick
connects).  When tilting up the racks, there is more strain on the lower
stand-offs.  Occasionally we will put a temporary N-S strut between
stand-offs to prevent lag pull out.

We use the Direct Power "Power Posts."  These are very solid and mount with
two lags.  It took some research to find roof jacks we like, but the Oatey
11830 and 11831 work great on the Power Posts.

We have about 50 Fast Jacks we won't use, and we could make you a deal on
them...

William Miller

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Sponsor a child today through Children International.
Give a desperately poor child hope for a brighter future.
For only $18 a month you can make a difference!
http://click.topica.com/caacBBFbz8QcsbAnkvFf/ChildrenInternational
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
http://click.topica.com/caacBBBbz8Qcsbz9JC9f/MyDietPatches
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------













More information about the RE-wrenches mailing list