Wind Turbines with Windy Boy Inverter - Point Power [RE-wrenches]
Kurt Nelson
sunwise at cheqnet.net
Fri Jun 25 21:15:41 PDT 2004
Your free subscription is supported by today's sponsor:
------------------------------------------------------------------
Get a FREE Mortgage Quote from Mortgage War. Simple application
for mortgage information. If you're ready to get a quote click
now!
http://click.topica.com/caacneLbz8Qcsbz9JC9a/411Web
------------------------------------------------------------------
Ray wrote: our local building code restricts the height to 35 ft, making
decent turbulence free installation difficult if not impossible.
Hi Ray -- I know a lot of building codes restrict buildings to two or
three stories or something like 35 feet, but this shouldn't be the same
deal restricting tower permits. Unless you are talking city/suburban
lots which are not suitable for wind systems anyways, you should be able
to pull a taller permit, at least anywhere I have heard about. If not,
don't bother with a wind genny.
Kurt Nelson
-----------------------------------------------------------
Let University of Phoenix make 2004 your year. Evening,
weekend or FlexNet® classes over 130 locations. Look
into our programs and get the degree that gets you going!
http://click.topica.com/caaciq1bz8Qcsbz9JC9f/UOP
-----------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list