Utilities and AC Disconnects [RE-wrenches]

[Joel Davidson]

===========================================================
Bounces like rubber! Shatters like ceramic! Discover Crazy 
Aaron's Thinking Putty in grown up handfuls. It's the 
creativity unleashing, mood enhancing desk toy!
http://click.topica.com/caab7pJbz8Qcsbz9JC9a/ Crazy Aaron Enterprises
===========================================================

Hello Bill,
You probably know this, but other wrenches may not. The least-cost way to
post site and electrical information is to plastic laminate (at Kinkos, etc)
your map and wiring diagram. Use sticky-back velcro strips to attach the
laminates to the service panel. Tip: Customers like to show off the PV
systems so the laminated wiring diagram is a good place to list your company
name, address, phone number, website.
Best regards,
Joel Davidson

----- Original Message ----- 
From: "Bill Brooks" <billb at endecon.com>
To: <RE-wrenches at topica.com>
Sent: Thursday, April 08, 2004 5:50 PM
Subject: RE: Utilities and AC Disconnects [RE-wrenches]


===========================================================
Your opinion counts! We're conducting a survey for a
computer service/repair company. When you complete our
survey, you will also be entered into a drawing for one of
ten $100 prizes. Just click
http://click.topica.com/caab6PVbz8Qcsbc0WJAa/ Val Rad
===========================================================
Mo,

What is your map placard made out of and roughly how much does it cost to
make?

Bill.

-----Original Message-----
From: Mo Rousso [mailto:mrousso at heliopower.com]
Sent: Wednesday, April 07, 2004 1:03 PM
To: RE-wrenches at topica.com
Subject: Re: Utilities and AC Disconnects [RE-wrenches]


Most of our installs are in SDGE territory.  This is what they allow us to
do with the Utility Visible Disconnect (UVD):

1.  UVD within 8 ft of service entrance
2.  UVD elsewhere, but accessible
3.  If going into a sub-panel, have the UVD take out the entire sub-panel at
the service entrance.  Electric service will in all likelihood be down
anyway, so this is not an inconvenience to the customer.

In all cases, the UVD needs to accessible 24/7 -- no dogs and no locked
gates, locked doors, etc that do not use an approved SDGE lock.

Also, in all instances, we need to provide a map placard at the service
entrance graphically depicting the location of the UVD and all major
equipment.
--
Mo Rousso
President
HelioPower, Inc
760.451.9374
www.heliopower.com


===========================================================
Let University of Phoenix make 2004 your year. Evening,
weekend or FlexNet® classes - over 130 locations. Look
into our programs and get the degree that gets you going!
http://click.topica.com/caab6aBbz8Qcsbc0WJAf/ UOP
===========================================================



- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

===========================================================
Your opinion counts! We’re conducting a survey for a 
computer service/repair company. When you complete our 
survey, you will also be entered into a drawing for one of 
ten $100 prizes. Just click
http://click.topica.com/caab6Pibz8Qcsbz9JC9f/ Val Rad
===========================================================
- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------