Utilities and AC Disconnects [RE-wrenches]
Bill Brooks
billb at endecon.com
Thu Apr 8 17:50:52 PDT 2004
===========================================================
Your opinion counts! Were conducting a survey for a
computer service/repair company. When you complete our
survey, you will also be entered into a drawing for one of
ten $100 prizes. Just click
http://click.topica.com/caab6PVbz8Qcsbz9JC9a/ Val Rad
===========================================================
Mo,
What is your map placard made out of and roughly how much does it cost to
make?
Bill.
-----Original Message-----
From: Mo Rousso [mailto:mrousso at heliopower.com]
Sent: Wednesday, April 07, 2004 1:03 PM
To: RE-wrenches at topica.com
Subject: Re: Utilities and AC Disconnects [RE-wrenches]
Most of our installs are in SDGE territory. This is what they allow us to
do with the Utility Visible Disconnect (UVD):
1. UVD within 8 ft of service entrance
2. UVD elsewhere, but accessible
3. If going into a sub-panel, have the UVD take out the entire sub-panel at
the service entrance. Electric service will in all likelihood be down
anyway, so this is not an inconvenience to the customer.
In all cases, the UVD needs to accessible 24/7 -- no dogs and no locked
gates, locked doors, etc that do not use an approved SDGE lock.
Also, in all instances, we need to provide a map placard at the service
entrance graphically depicting the location of the UVD and all major
equipment.
--
Mo Rousso
President
HelioPower, Inc
760.451.9374
www.heliopower.com
===========================================================
Let University of Phoenix make 2004 your year. Evening,
weekend or FlexNet® classes over 130 locations. Look
into our programs and get the degree that gets you going!
http://click.topica.com/caab6aBbz8Qcsbz9JC9f/ UOP
===========================================================
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list