SW firmware upgrade flourescent flicker [RE-wrenches]

[Don Loweburg, Offline]

In a message dated 2/24/2004 10:43:09 PM Pacific Standard Time, 
solarcowboy at yahoo.com writes:
I'd love to put the old software back in, but...
I didn't use a chip puller to remove the original
software, instead I used a screwdriver and this bent
some of the pins on the chips.  I'm not sure if this
makes them unusable, but I also threw the old stuff
away.

You don't have an extra set of the original software
laying around do you?


Sorry Jerry, I don't.

Don

[Non-text portions of this message have been removed]

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------