SW Plus [RE-wrenches]

[Darryl Thayer]

Hi Joel and Todd
I have had good success with the Outback systems I
have installed.  

I am presently installing a large Outback system with
both 3 phase, UPS  and of course grid tie.  I went
head to head with other bids and I was both lowest and
could offer the most features.  The UPS was part of
the RFP and others that had to add a UPS seperatly
derived system and drove their price much higher.  

The Outbacks strong point was flexibility.  I could
offer from 4 to 40 kW just by changing the number of
MX60s and GVFXs.  I could offer heavy single phase
componet to the Three phase.  I can easily change the
size of the UPS, just by wiring and programing the
GVFXs.  The UPS is much smaller than the total system.
 

Earily in the design phase there were problems with
the system sizing and the Outback Modular system
allowed easy pricing and scaling.  Also the scaling
allowed the higher efficiency, when the solar supply
is limited the outback will scale back and only a few
FX's will partisipate.   

I am hoping to supply a wind generator later for  this
same customer, and add the wind to the solar unsing
the FX to grid tie the wind machine.

Daryl
--- "Todd Cory, Mt. Shasta Energy Services"
<toddcory at finestplanet.com> wrote:
> Clearly, the Outback gear is the best thing going
> now for grid ties with
> battery  backup... and dare I say it might even
> steel away some of the non
> battery grid tie market as it has similar
> efficiencies AND the big advantage of
> offering back up power during grid outages.
> 
> Todd
> 
> 
> Joel Davidson wrote:
> 
> > Allen, thanks for the feedback. The old SW4048
> pre-GTI was/is great for
> > grid-tied net-metered PV systems. Although this
> market has shrunk, what are
> > you all installing now for people who want
> grid-tie and battery backup?
> > Joel Davidson
> 
> - - - -
> To send a message: RE-wrenches at topica.com
> 
> 

__________________________________
Do you Yahoo!?
Yahoo! Finance: Get your refund fast by filing online.
http://taxes.yahoo.com/filing.html

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------