Goldline controllers on 24 vdc [RE-wrenches]

[Brad Bassett]

Kirk,

The Goldline SP controllers are set up to run on 24VDC or AC from the 
factory, no modifications necessary. Also I believe that many of the 
Tekmar controls will run on 24VDC. 

Brad
AEE



Kirk Herander, VSE wrote:
> 
> To Allan et al:
> 
> You said a while ago that the GL-30 controller will operate on 24 vdc. 
> Do
> you have any experience of Goldline's SP series (single stage setpoint)
> being able to do the same. I would presume so, since they accept 
> multiple AC
> voltages(same power supply?) like the GL-30.
> 
> thanks, Kirk
> 

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------