DC plugs and outlets [RE-wrenches]
Michael Welch
michael.welch at homepower.com
Fri Nov 19 09:48:04 PST 2004
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Free Thanksgiving recipes for you
http://click.topica.com/caacQ4Qbz8Qcsbz9JC9a/PermissionData
-------------------------------------------------------------------
http://www.marinco.com/dcdevice.htm
Doug Pratt wrote at 08:08 AM 11/19/2004:
>Hi Kurt, actually there IS a good quality, code-compliant NEMA
>plug/outlet that's specifically for DC. It's the NEMA FSL-1-30P, rated
>for 28-volt, 30-amp with a locking 3-prong design. But good luck trying
>to find any. All my years in this industry, and I'd have never known
>about it if John Wiles hadn't mentioned it...almost in passing...while
>talking about acceptable DC plugs and outlets in his "Suggested
>Practices". Found here:
>http://www.nmsu.edu/Research/tdi/public_html/pdf-resources/NEC.pdf
>
>Cheers,
>Doug
>
>-----Original Message-----
>From: Kurt Nelson [mailto:sunwise at cheqnet.net]
>Sent: Friday, November 19, 2004 7:16 AM
>
>In any case, the problem I still see is that there doesn't seem to be a
>good quality code compliant DC plug/outlet other than the afore mention
>cigarette lighter junk.
Michael Welch
------------------------
"The California crunch really is the result of not enough power-generating plants and then not enough power to power the power of generating plants."
Resident George "Dubya" Bush
Michael Welch, michael.welch at homepower.com
Home Power magazine
www.homepower.com
To reach me: 707-822-7884
To reach Home Power: 800-707-6585
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Stock car lovers - get a FREE gift here!
http://click.topica.com/caacSnKbz8Qcsbz9JC9f/PermissionData
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list