Load control [RE-wrenches]

[Darryl Thayer]

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Are you serious about buying a NEW car or truck soon? 
Research before stepping on the car lot and save THOUSANDS!
Get NO OBLIGATION price quotes from car dealers in your area.
http://click.topica.com/caacOlPbz8Qcsbz9JC9a/LeadClick
-------------------------------------------------------------------

Hello Bob and others
HOw does the SW serve as a high limit control for DC? 
I was thinking William was asking for a high voltage
limit control?  

Please inform me. 
Thanks Daryl

--- "Todd Cory, Mt. Shasta Energy Services"
<toddcory at finestplanet.com> wrote:

> Sounds like a job for the old mechanical relay
> driven C-30... remember those?
> 
> Todd
> 
> 
> "Bob-O Schultze, Electron Connection" wrote:
> 
> > William,
> > The C40 is a PWM controller with no adjustment for
> turn on, turn off.
> > Inappropriate for driving a relay or any motor
> load. It should be
> > used for resistive loads only. You need a very
> simple voltage
> > controlled switch with adjustable on and off
> points to drive the
> > relay. If you are using an SW inverter, you've got
> it built in
> > already. If an SW+, buy the ALM module.
> > bob-O
> 



		
__________________________________ 
Do you Yahoo!? 
Check out the new Yahoo! Front Page. 
www.yahoo.com 
 

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Free recipes to get you in shape
http://click.topica.com/caacOlCbz8Qcsbz9JC9f/PermissionData
-------------------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquette.php

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------