outback 3 wire gen start [RE-wrenches]
Christopher Freitas --- OutBack Power
cfreitas at outbackpower.com
Fri Sep 10 19:12:08 PDT 2004
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Should School Prayer be mandatory? Give us your opinion and win.
http://click.topica.com/caacDvTbz8Qcsbz9JC9a/PermissionData
-------------------------------------------------------------------
jay peltz wrote:
> Say wondering what folks are using out there for starting 3 wire gennys
> from an Outback inverter.
Sorry for the delay on replying to this - was busy last week testing
products in the Blackrock desert...
The 2-to-3 wire adapter we recommend here at OutBack is the GSCM from
Aktinson Electronics of Utah:
http://www.atkinsonelectronics.com/product_pdfs/GSCM.pdf
Its actually the spiritual decendant of the legendary "GenWizard"
previously offered by the former Ph*tr*n ... but the GSCM has
instructions that you can actually read... and, like the GenWizard, the
GSCM has enough terminals and adjustments to allow it to be capable of
starting 120% of the generators known to exist - I think it could even
be used to autostart any alien spaceships you might find as well...
I was told recently that Aktinson has an application note specifically
on using it with the OutBack FX inverters...
I have talked with several people who have these in use and they report
them working well once the wiring was figured out - best of luck...
Christopher Freitas
OutBack Power Systems, Inc.
cfreitas @ outbackpower.com
www.outbackpower.com
Arlington WA USA
Tel 360 435 6030
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
http://click.topica.com/caacBBBbz8Qcsbz9JC9f/MyDietPatches
-------------------------------------------------------------------
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list