install time for tile trac [RE-wrenches]

William Korthof wkorthof at earthlink.net
Fri Jun 18 14:06:46 PDT 2004


<x-flowed>
 

-----------------------------------------------------------
Give Your Team Access to Their PCs from Anywhere. Increase 
productivity with a secure remote-access solution from 
GoToMyPC Pro. Stay in touch with your office. FREE TRIAL:
http://click.topica.com/caaciqXbz8Qcsbz9JC9a/ExpertCity
-----------------------------------------------------------

For full flashed stanchions, our installed cost runs $25-$35 per post
(hardware+labor) for most tile roofs. For Calflake (or is it Calshake?)
and other flimsy, flakey, fiber-tile products, special work is required
(reroof with comp.) but the roofer we use is familiar, comfortable and
economical doing the preparation for solar installations. Even the
re-roof situations usually aren't that bad (~$2-3/sq ft with 30yr comp).
Since we typically use 1-1.5 posts per panel, a price of $40-$60 per
panel (extra for tile) normally works for us.

/wk


At 10:00 AM 6/18/2004, you wrote:

>-----------------------------------------------------------
>Give Your Team Access to Their PCs from Anywhere. Increase productivity 
>with a secure remote-access solution from ToMyPC Pro. Stay in touch with 
>your office. FREE TRIAL:
>http://click.topica.com/caaciqXbz8Qcsbdh77Ha/ExpertCity
>-----------------------------------------------------------
>
>A question for wrenches using prosolar's tile trac product on tile roofs:
>
>How much additional labor time do you find for installing on a tile roof 
>over installing on a composite shingle roof?
>(per attachment point or per kw or per ?)
>
>Thanks,
>
>Antony
>
>-----------------------------------------------------------
>Let University of Phoenix make 2004 your year. Evening, weekend or 
>FlexNet® classes ­ over 130 locations. Look into our programs and get the 
>degree that gets you going!
>http://click.topica.com/caaciq1bz8Qcsbdh77Hf/UOP
>-----------------------------------------------------------
>
>
>
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
>
>List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm
>
>Check out participant bios: www.mrsharkey.com/wrenches/
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com

-----------------------------------------------------------
Apply now for a No-Annual-Fee Discover® Platinum Card 
0% Intro APR*, No Annual Fee, Up to 2% Cashback Bonus® 
award* Start Saving Today – APPLY NOW! It's fast, easy and 
secure. 
http://click.topica.com/caaciqQbz8Qcsbz9JC9f/Discover Card
-----------------------------------------------------------

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------



</x-flowed>



More information about the RE-wrenches mailing list