Cooling 8 Sunny Boys [RE-wrenches]

Allan Sindelar allan at positiveenergysolar.com
Wed Apr 7 13:18:27 PDT 2004


===========================================================
Your opinion counts! We’re conducting a survey for a 
computer service/repair company. When you complete our 
survey, you will also be entered into a drawing for one of 
ten $100 prizes. Just click
http://click.topica.com/caab6PVbz8Qcsbz9JC9a/ Val Rad
===========================================================
How about a simple adjustable thermal snap switch, such as Grainger part
number 4E116?
Allan at PosE

----- Original Message ----- 
From: "Jeff Clearwater" <clrwater at earthlink.net>

I'd still like to do it with a heat sink mountable thermostat that
could handle the 1 amp 120VAC power supply input or the 12 V PV input
to all fans (6 amps DC).  Any ideas on that?  What's the one used in
the Sunny Breeze rated at amperage wise?

===========================================================
Your opinion counts! We’re conducting a survey for a 
computer service/repair company. When you complete our 
survey, you will also be entered into a drawing for one of 
ten $100 prizes. Just click
http://click.topica.com/caab6Pibz8Qcsbz9JC9f/ Val Rad
===========================================================
- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------







More information about the RE-wrenches mailing list