Off-ideal Array Tilt Output [RE-wrenches]

[William Korthof]

<x-flowed>
===========================================================
Graduate in less than 13 months with AIU’s Online virtual 
campus. Classrooms and student service as close as your 
computer. Highly accredited, study anytime – anywhere.
http://click.topica.com/caab6anbz8Qcsbz9JC9a/ AIU
===========================================================




>
>William,
>
>The overall average wire losses should be about 75-80% of peak power because
>for a typical system in the U.S. (except Alaska) 50% of energy is generated
>above 800 W/m^2 and 50% of energy is generated below 800 W/m^2.
>
>Bill.

Thanks, I stand corrected.

/wk


===========================================================
Need to find the right school to fit your needs 
CollegeInformation.info has already found it. Get educated 
on your future – degrees, financial aid and more!
http://click.topica.com/caab6afbz8Qcsbz9JC9f/ College Info
===========================================================


- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------



</x-flowed>