Adding MX60 to Power Panel [RE-wrenches]

[Kurt Nelson]

-----Original Message-----
From: Jay Peltz, Peltz Power [mailto:jay at asis.com] 

There is another issue high voltage damage potential to the inverter....


Yup, where I have seen damage is where DC loads (electronic CFL
ballasts, LED night-lights, etc) "see" open circuit voltage of the PV.  

Kurt Nelson

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------