12V machine data collection [RE-wrenches]
Ken Hulet, Engineering Services Co.
Ken.Hulet at redwoodalliance.org
Fri Mar 5 08:55:48 PST 2004
<x-flowed>
Looking for ideas to collect power used on a small 12VDC agricultural
machine.
We need to collect some data on a prototype used in the field. I recall
seeing an HP article about using the HOBO units with current flow
sensors. Does this make sense for the prototype data collection?
If this all works we'll eventually want to add a user 'fuel gauge' on
the machine. Do you think the simple volt meter schemes are acceptable?
This is a LOW power machine, less than 50W.
ken
Ken & Chris Hulet
Engineering Services Co.
P.O. Box 4
Blanchardville, WI 53516
608.523.3726
http://www.revolutionearth.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list