FX2024 [RE-wrenches]

[Windy Dankoff, Dankoff Solar]

<x-flowed>
Caution! When dealing with conventional induction-motor pumps (not 
SQ), don't forget to differentiate between a 2-wire pump (no control 
box) and a 3-wire pump. The 2-wire does not have a separate start 
winding and is much more problematic to start. I think these cheapie 
pumps only exist in 1/3 and 1/2HP sizes.

Windy


>cvsolar at aol.com
>writes:
>FX2024 is strong enough to run a 1/3 hp well pump with a 240 transformer. 
>The
>
>I'm comfortable going up to 1/2 hp on this size inverter. Tranformer a bit of
>a drag -but very workable.
>
>Don

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://lists.topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------


</x-flowed>