large -48VDC inverter recommendation [RE-wrenches]

[Kurt Albershardt]

<x-flowed>
Load is computers & other telecom gear.  99% switchmode supplies (think power factor) likely.

Taking the rest off to email, still interested to hear any other suggestions.





--On Wednesday, February 25, 2004 3:54 AM +0000 Christopher Freitas --- OutBack Power <cfreitas at outbackpower.com> wrote:

> What are the AC loads that the system(s) will be powering?
>
> Often the AC loads can be broken up into smaller groups and powered with
> several smaller inverter systems more practically.
>
> We can easily make a rackmount version of the FX - it uses 6 "U"s of
> space (8.25" tall total) and would fit either 19" or 23" racks.  A total
> of 10 units just happens to fit in a standard 7 foot tall rack bay.
>
> Christopher
>
>
> Kurt Albershardt wrote:
>>
>> They have a 10,000A DC plant and rivers of 750 MCM cable running about
>> the place.
>>
>> Timeframe is probably 2-3 months but I can check to make sure.  It could
>> easily be setup as several smaller banks, maybe one per 19" or 23" bay.
>> What kind of power (complete system with DC & AC disconnects, etc.)
>> could you get into a 7' bay?
>
>
>
> Christopher Freitas
> OutBack Power Systems, Inc.
> cfreitas @ outbackpower.com
> www.outbackpower.com
> Arlington WA USA
> Tel 360 435 6030
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------






</x-flowed>